Best 3D printer for beginners: Kobra X Combo at £430 vs Kobra 3 Max V2 at £600
£170 separates these two Anycubic bundles, and they are not two sizes of the same idea. The Kobra X Combo at £430 prints inside a 260 mm cube and changes colour seven ways out of the box. The Kobra 3 Max V2 Combo at £600 prints inside a 420 × 420 × 500 mm box — 88 litres — and changes colour four ways, eight with extra hardware.
One is a multicolour machine that happens to be small. The other is a large-format machine that happens to do colour. Which is worth £170 depends entirely on whether your problem is "I want a multi-coloured dragon" or "I want a helmet that fits".
The Kobra X Combo at £430
Anycubic's trick with the Kobra X is packaging. The ACE Gen 2 colour system has been shrunk and moved into the toolhead rather than sitting in a separate box beside the printer, which is why the whole thing occupies a desk corner instead of half a workbench. Native colour count is seven, expandable to 19 with additional hardware.
Tom's Hardware ran it head-to-head against a Bambu Lab A1 and found the colour swap averaged 35 seconds from cut to purge, against 90 seconds or more on the A1. On a four-colour print with 776 swaps, that added up to roughly 10 hours saved. That is the number that matters for multicolour work: not peak flow rate, but how long the machine spends doing something other than printing.
Build volume 260 × 260 × 260 mm, maximum speed 600 mm/s, and the standalone Kobra X without the colour unit is £280 in the same feed. All3DP's German test called it a competent device and a good value proposition at around €300, with the caveat that the Kobra S1 Combo scores slightly better thanks to its enclosed chamber.
The Kobra 3 Max V2 Combo at £600
This is a different category of object. 420 × 420 × 500 mm gives 88 litres of build volume, and the machine itself measures 706 × 640 × 753 mm and weighs around 18 kg — plus the separate ACE 2 Pro unit at 368 × 291.5 × 236.5 mm and another 3.7 kg. You need a dedicated table, not a shelf.
Specification: 600 mm/s maximum speed, four colours standard, up to eight with additional hardware, auto-levelling, and AI spaghetti detection that watches the print and stops when it turns into a bird's nest. TechRadar covered the launch deal — £519 early bird against a £849 list in the UK, $569 against $899 in the US. Our feed currently shows £600, which is above the early-bird price and below list.
The value case is simple arithmetic. A 300 mm model printed on a 260 mm machine has to be cut into sections, pinned, glued and sanded. On the Max V2 it prints in one piece overnight. If you make cosplay armour, large props, lamp shades, or anything architectural, that is not a convenience — it is the difference between a project and a compromise.
| Spec | Kobra X Combo | Kobra 3 Max V2 Combo |
|---|---|---|
| — | £430 in our feed | £600 in our feed |
| — | 260 × 260 × 260 mm | 420 × 420 × 500 mm (88 L) |
| — | 7 native, up to 19 | 4 standard, up to 8 |
| — | ACE Gen 2, inside the toolhead | ACE 2 Pro, separate 3.7 kg box |
| — | 600 mm/s | 600 mm/s |
| — | Desktop | 706 × 640 × 753 mm, 18 kg |
| Model | Price | Type |
|---|---|---|
| Anycubic Kobra X Combo 3D Printer, Native 7-Color Printing (Up to 19) Check price | £430 | 3D printer |
| Anycubic Kobra 3 Max V2 Combo 3D Printer, 88L Build Volume, Up to 8-Color Check price | £600 | 3D printer |
The honest problem with both: Anycubic's colour hardware
Anycubic's multi-colour units have a mixed record, and pretending otherwise would be dishonest. Creative Bloq spent four months with a Kobra 3 V2 and wrote that the machine itself is a great little bedslinger, beginner-friendly and easy to operate, but that the ACE Pro unit in the combo bundle is the problem. The same reviewer had already been through two faulty Kobra S1 Combos.
That is one reviewer's experience, not a statistical sample. But it points at something structural: the colour changer is a mechanical device with motors, feeders and sensors, and it is the part most likely to fail on any brand's multicolour system. On the Kobra X, that mechanism now lives inside the toolhead — fewer tubes, shorter path, and also more mass moving at 600 mm/s.
If you are buying colour for occasional use, this matters less. If you plan to run multicolour prints daily, budget for the possibility that the colour unit, not the printer, is what you will be troubleshooting.
Where the cheap one wins beyond price
Footprint and heat-up time. A 260 mm cube heats faster, uses less power, and fits on a desk. For a beginner printing models under 200 mm, the Max V2's extra volume is dead space that costs £170 and a square metre of room.
Colour count is also genuinely better: seven native against four. If your prints are decorative — figures, terrain, toys — the Kobra X produces more interesting objects out of the box, and the toolhead-mounted changer is faster at swapping.
Where the big one wins
Everything that does not fit. And a few things that do: a 420 mm bed lets you print four small parts at once instead of one, which matters if you are making a set. The AI spaghetti detection is also a real feature on long prints — a failed 30-hour print wastes more than the £170 difference.
Practical warning: 88 litres of build volume means long prints, and long prints mean you will want an enclosure eventually. Neither of these machines ships with one, and a draught across a large ABS print is the most common way a big job fails.
Verdict
Buy the Kobra X Combo at £430 if your models fit in a 260 mm cube, you want maximum colour with minimum bench space, and you print in PLA and PETG. It is the better first printer of the two, and the £170 saved buys a lot of filament.
Buy the Kobra 3 Max V2 Combo at £600 only if you have a specific object in mind that will not fit in 260 mm. That is the whole test. Large-format printing is not a nice-to-have upgrade; it is a different workflow with different failure modes, and if you do not already know you need it, you do not need it.
One price caution: the Max V2 Combo launched at £519 early bird and has since drifted upward in our feed. If it comes back under £550, the value case improves sharply. See the other side