PrintVerdict

Best 3D Printer for Beginners at £280 vs £300: Anycubic Kobra X against Kobra 4 Combo

We have not tested these printers. No machine on this page has been assembled, calibrated or run by us. Our comparisons are built from published specifications, current retail prices and summaries of publicly available owner feedback — never from hands-on claims we cannot back up.

Twenty pounds. That is the entire gap between the Anycubic Kobra X at £280 and the Kobra 4 Combo at £300. Both print in four colours. Both are aimed at people who have never owned a printer. Twenty pounds is not a budget decision — it is a decision about which machine you want to live with.

And they are genuinely different machines, not the same box with a different badge.

How the colour actually gets into the print

The Kobra X puts four spools on the machine itself. The filament paths are short, the printer knows where each colour is, and there is no separate unit on the floor beside it. Anycubic sells it as native four-colour printing at 600 mm/s, and TechRadar's review headline called it a 4-colour printer that is "surprisingly good" for beginners — which, from a site that has reviewed most of the sub-£400 market, is not a throwaway line.

The Kobra 4 Combo does it with an ACE 2 Pro unit: a separate box that holds four spools, feeds them into a single extruder, and — this is the part people miss — dries filament while it prints. That box is not a small accessory. It takes up a second footprint on the desk and adds a cable run between two devices. In exchange, Anycubic rates the Kobra 4 platform to eight colours with two ACE units stacked, and the drying function is worth real money if you print PETG in a British winter.

So: integrated and compact, or modular and expandable. For £20, that is a strange amount of choice, and it exists because the Kobra 4 is a generation older hardware at a discount while the Kobra X is the newer, tighter design.

What £280 does not include

Nothing. The Kobra X at £280 is a complete printer with four colours. The listing that says "for kids and beginners" is the same hardware in different marketing copy — check the model number before ordering, because Anycubic has several listings of the same printer at the same price and the descriptions are not consistent.

The Kobra 4 Combo at £300 includes the ACE 2 Pro. Bought separately, that unit costs roughly £200 in the UK, which is why the Combo price looks odd until you realise the printer itself is being discounted hard. If you ever want to add a second ACE for eight colours, the Combo is the cheaper route in.

The independent verdict on the Kobra X

All3DP tested it and reached a more ambivalent conclusion than the launch coverage: the machine is competent, the waste argument is real but the savings are not as large as Anycubic claims, and long-term spare-part availability is unclear because Anycubic rotates its product line fast. That last point is the one to weigh. A £280 printer that cannot get a hotend in 18 months is a £280 printer with a two-year life.

Creative Bloq's reviewer spent four months with a Kobra 3 V2 and wrote a piece titled, roughly, that they were fed up. Different model, same platform family, same support organisation. Neither of those is a reason to avoid the Kobra X — it is a reason to buy from a retailer with a straightforward returns process rather than the cheapest grey listing.

Tom's Hardware keeps an Anycubic machine in its budget picks most months, which tells you the hardware is not the problem. The variance is in the unit you receive and the support ticket you open.

Speed claims, honestly

600 mm/s is a maximum travel-and-print figure under ideal conditions, not what you will see on a four-colour model with 0.4 mm nozzle and standard PLA. Real multicolour prints on either machine run at a fraction of that, because every colour change costs time and purges filament. Neither printer is fast in the way a single-colour CoreXY is fast. Both are fast enough that a beginner will not notice the difference between them.

The purge maths nobody puts on the box

Every colour change costs filament. The extruder has to empty the old colour before the new one arrives, and that emptied plastic goes in the purge tower, not in your model. Assume roughly a gramme per change on a 0.4 mm nozzle. A 40-change print wastes about 40 g — a sixth of a 1 kg spool, or roughly £4 of PLA at current prices.

The Kobra X's advantage here is path length. Four spools sit on the machine, the distance from spool to hotend is short, and short paths waste less per change. The Kobra 4 Combo pushes filament through a tube from a separate box, which is a longer run and a correspondingly larger purge. It is not a decisive difference, but on a beginner's first multi-colour month, when most prints are small and change-heavy, it adds up faster than the £20 price gap suggests.

Where the Combo wins back the difference: drying. Wet filament is the single most common cause of stringing, popping and weak layer adhesion in a British house from October onwards, and a dryer costs £50 to £70 on its own. If you were going to buy one anyway, the £300 machine is effectively £230 plus a dryer that also happens to feed four colours.

Which one, then

Small desk, one material, wants the simplest possible setup: Kobra X at £280. Everything is on the machine, the footprint is one rectangle, and £20 stays in your pocket for filament.

Prints PETG or TPU, wants to dry filament, or expects to want six or eight colours later: Kobra 4 Combo at £300. The ACE 2 Pro is the more useful half of that bundle, and the drying function alone justifies the difference if you live somewhere damp.

One thing to budget for either way: a filament dryer is not optional in the UK from October to March. If the Combo's built-in drying is what tips you towards the £300 machine, that is a rational reason — more rational than the colour count.