PrintVerdict

Kobra S1 Max at £600 or the Combo at £800: is the best 3d printer for beginners the one without colour?

We have not tested these machines. Nothing on this page was installed, run or measured by us. Every claim is either a published specification, a price taken from the retailer listing on the day of writing, or a summary of a named third party’s review or owner report — attributed in the text.

Two hundred pounds. The Anycubic Kobra S1 Max is £600, the S1 Max Combo is £800, and the only difference in the box is the ACE 2 Pro multi-colour unit. Everything else — the 350 × 350 × 350 mm build volume, the fully enclosed CoreXY frame, the 65 °C chamber, the 600 mm/s motion — is identical.

That makes this the cleanest upgrade question in the current UK printer market. It is not "which printer", it is "is colour worth £200 and a second box on the desk".

What the Max actually is

A 350 mm cube is 42.9 litres of build volume, big enough for a full helmet in one piece or a batch of eight brackets at once. The enclosure is not cosmetic: a heated chamber that holds 65 °C is what lets ABS and ASA cool slowly enough not to split along layer lines, and it keeps draughts off large PLA prints on a cold windowsill in February.

Fully enclosed also means the noise stays in and the cat stays out, which for a machine that runs six-hour prints in a spare room is worth more than the spec sheet suggests.

What the ACE 2 Pro adds, and what it costs you

The ACE 2 Pro is Anycubic's filament management unit — four spools, active drying, and the ability to switch material mid-print for colour changes or for supports in a different polymer. On the S1 Max Combo it is the difference between a single-material machine and a multi-colour one.

Two things get worse. The footprint grows by roughly the size of a second printer, and the failure surface doubles: a jam in the ACE stops the print as surely as a jam in the hotend, and it is harder to reach.

PrintPick's catalogue, which scores machines from specifications and published test results rather than its own lab work, gives the Kobra S1 ACE 2 Pro Combo 8 out of 10 and ranks it 28th of 51 current FDM printers. Its own note is the useful part: it flags "early adopter risk on firmware and ACE 2 Pro reliability", and suggests that for casual multi-colour users the 8-colour Kobra S1 Combo is the better value because 16 colours is overkill unless you print flags, pixel art or multi-material models regularly.

That is a third party saying, in print, that the Combo bundle is the part of the package to be sceptical about — not the printer.

The slicer problem nobody puts on the box

Tom's Hardware reviewed the Kobra S1, the 250 mm sibling that shares Anycubic's software stack, and titled the review "Good printer, bad slicer". The hardware verdict was positive; the software was the complaint. Multi-colour printing makes that worse, because colour assignment, purge volumes and wipe towers all live in the slicer. A machine that prints beautifully in one colour and fights you over a five-colour model is not a machine that has solved multi-colour — it has added a feature to a workflow that was already the weak point.

None of that means the Combo is bad. It means the £200 buys hardware, and the software burden arrives free.

Who should buy the £600 version

Anyone printing functional parts. Brackets, jigs, replacement clips, drone frames, storage boxes — none of these want colour, all of them want the 42.9 litre volume, and every one of them benefits from an enclosure that keeps warping down. Spending £200 on an ACE unit to print grey PETG is £200 that could buy four kilos of filament and a spare hotend.

Anyone whose hobby is modelling rather than printing. If you paint your prints, colour switching is wasted on you.

Anyone with a small flat. The Max alone is already a floor-standing object; the Combo adds a second one.

Who should pay the £800

People who sell printed objects where colour is the product: signs, keyrings, logos, cosplay trim, anything a customer chooses from a colour chart. For that work the ACE is not a luxury, it is the machine, and doing it by manual spool swaps on a 300-print order is not a business.

And people who print supports in a different material. Soluble or breakaway interfaces are the least glamorous use of a multi-material unit and the one that most improves the underside of a print. If you print mechanical parts with overhangs, that alone can justify the unit — but it does not need 16 colours, and a four-slot ACE covers it.

What 65 °C actually changes

An enclosed chamber rated to 65 °C does three things at once. It slows cooling on ABS and ASA so the part does not split; it keeps draughts off large PLA prints near a window; and it keeps the noise of a six-hour job inside a box instead of in the room. On a 350 mm machine printing large flat parts, all three matter — a big ABS panel on an open frame warps at the corners almost by definition.

The trade is heat soak. A chamber that holds 65 °C takes time to get there and time to cool, so a twenty-minute PLA job becomes a longer event, and you cannot reach in to clear a blob without gloves. Anyone printing small parts all day will find the enclosure more annoying than useful. Anyone printing one big part overnight will not.

The filament maths

Two hundred pounds is roughly fifteen kilos of decent PLA at current UK prices, or eight kilos of PETG plus a hardened nozzle. On the Max that is a lot of printing — a 350 mm bracket in PETG weighs perhaps 120 g, so eight kilos is north of sixty parts before you buy anything else.

On the Combo the same £200 buys the ACE unit, and the running cost changes: colour changes burn filament in the purge, and four spools open at once means four spools absorbing moisture. The unit does dry actively, which is its advantage over the desiccant-only systems on some rivals, but it still rewards planning — load what you need, not what you own.

The verdict

At £600 the S1 Max is the better value of the two for most buyers, and the "best 3d printer for beginners" framing pushes people the wrong way — a beginner does not need multi-colour, a beginner needs a machine that does not fail overnight. The enclosed 350 mm cube does that job.

The Combo at £800 is the right buy for a specific, identifiable person: someone whose work involves colour, who has already accepted that slicer time is part of the hobby, and who has space for two boxes. Everyone else should take the £600 machine and spend the difference on filament.