PrintVerdict

Anycubic Kobra X Combo: the best 3D printer for beginners if you actually print in seven colours

We have not tested these printers. No machine on this page has been assembled, calibrated or run by us. Our comparisons are built from published specifications, current retail prices and summaries of publicly available owner feedback — never from hands-on claims we cannot back up.

£559 for the Combo, £310 for the plain Kobra X. Between them sits a £249 question that most buying guides skip: does a beginner need seven colours, or does a beginner need a machine that unclogs easily? The two answers point at different products, and both are Anycubic's.

We have not printed anything on either machine. What follows is the published specification, current UK pricing, and what reviewers and owners have said publicly — including the two complaints that come up repeatedly enough to plan around.

The two models, and why the gap matters

The Kobra X Combo is the multicolour package: native seven-colour printing, expandable to nineteen with additional units, 4.1 stars from 858 ratings at £559. There is a second Combo listing at £450 with 4.3 stars from 268 ratings, same native seven-colour claim and a "2X faster" headline. The plain Kobra X drops to four colours and £310, and it is the best-reviewed variant of the family at 4.2 stars from 1,295 ratings.

Kobra X family on Amazon UK

  • Kobra X Combo, native 7 colours (up to 19): £559, 4.1 stars, 858 ratings
  • Kobra X Combo, native 7 colours, 2X faster: £450, 4.3 stars, 268 ratings
  • Kobra X, 4 colours, 600 mm/s: £310, 4.2 stars, 1,295 ratings
  • Kobra X, 4 colours, "kids and beginners": £280, 4.3 stars, 272 ratings

Read those numbers as a popularity chart rather than a quality ranking. The four-colour machine has fifty percent more ratings than the seven-colour Combo and scores higher. That pattern usually means one thing: the cheaper product is being bought by more people, and the people buying it are happier, because they expected less.

What TechRadar actually reviewed

TechRadar's review headline is precise about the machine in front of the reviewer: "I tested the beginner-friendly Anycubic Kobra X — a 4-color 3D printer that's surprisingly good." That is the £310 model, not the £559 Combo, and it is worth being pedantic about. Much of the goodwill attached to the Kobra X name in buyer discussions comes from a review of the four-colour version, and none of it establishes that the seven-colour changer works as smoothly.

That distinction matters because a multicolour system is a mechanism, and mechanisms break. A single-colour FDM printer has one path from spool to nozzle. A seven-colour printer has a changer, a set of tubes, a purge block and a controller that has to keep track of which filament is where.

Complaint one: no dryer

The most concrete objection in the owner discussions is about filament drying, and it is arithmetic rather than opinion. A buyer in r/3Dprinting who chose the Kobra 4 Combo over the Kobra X laid it out: the X does not ship with any dryer, and buying Anycubic's ACE Pro 2 to add one costs roughly $289 more. That changes the comparison completely — the "cheaper" multicolour printer becomes the more expensive one as soon as you care about wet filament.

In the UK that is not a hypothetical. PLA left on a shelf through a damp autumn prints with stringing and weak layer adhesion, and PETG is worse. If your printing space is a garage or a shed, a dryer is not an upgrade, it is a requirement, and it belongs in the budget from day one.

Complaint two: clearing a clog

The second objection is about maintenance access, and it came from a first-time buyer in r/3dprinter comparing the Kobra X against Creality's K2. Their reasoning: the integrated filament switcher on the Kobra makes clearing a clog far more hassle than on a machine where the PTFE path runs straight to the nozzle, and on the K2 the nozzle assembly can be swapped rather than cleared.

Whether you agree depends on how often you clog. Beginners clog. A first printer that requires partial disassembly of a changer to recover from a bad print is a first printer that sits idle for a month.

There is a third issue in the same thread family, from an owner who posted a long, hostile account of Anycubic's support and repairability: the print head, in their words, is not built for repair yet often needs it, and they describe doing maintenance between every print. That is one person's account, not a survey. It is also the kind of account that tends to appear around machines sold at this price point across every brand, so treat it as a warning about expectations rather than a reason to avoid the product.

Where the Combo earns its money

Seven colours, natively, without splicing. For anyone printing miniatures, signage, or anything where colour is the point rather than an afterthought, that is the entire purchase. The alternative is painting, and painting well takes longer to learn than 3D printing does.

Nineteen colours via expansion is a marketing number in the same way that a car's top speed is: technically true, practically irrelevant for most owners. Two changer units and seven colours will cover nearly everything a hobbyist does.

The call

If you are buying your first printer and you do not have a specific multicolour project in mind, buy the £310 four-colour Kobra X. It has the largest and happiest review base in the family, it is the machine TechRadar actually tested and liked, and £249 saved buys a filament dryer, several kilos of PLA, and the spare nozzle you will eventually need.

Buy the Combo if colour is the reason you are buying a printer at all — miniatures, props, anything where a single-colour print would need painting afterwards. Then add a dryer to the budget, and accept that recovering from a clog will take an evening rather than ten minutes.

Both listings, for price checks:

Anycubic Kobra X Combo, native 7-colour printing (up to 19) — current UK price

Anycubic Kobra X, 600 mm/s, 4-colour printing

One number to hold on to

£249. That is the difference between the Combo and the four-colour machine, and it is also roughly what a dryer plus a few kilos of decent filament costs. If you cannot name the seven-colour print you want to make, the Combo is charging you for a capability you have not yet decided to use — and the four-colour machine has 1,295 ratings saying it is the safer first purchase.