PrintVerdict

£280 for four colours, £400 for 88 litres: two Anycubic printers, one honest trade

We have not tested either printer. No machine was assembled, calibrated or run by us. Prices and rating counts come from our own UK feed; build volumes and hotend details are Anycubic's published specifications. Review conclusions are quoted from TechRadar's Kobra X test by Alastair Jennings and from Creative Bloq's four-month Kobra 3 V2 test, which is the source for the multi-colour unit complaints.

Anycubic's UK shelf has a £120 gap between two machines that are not really competitors. The Kobra X is £280 with 4-colour printing built in, 4.2 stars from 1,304 ratings. The Kobra 3 Max V2 is £400, single colour, with a 420×420×500 mm build volume — 88 litres — 4.2 stars from 904 ratings.

One is a small machine that changes colour. The other is a big machine that does not. If you are buying your first printer and every list of the best 3d printer for beginners mentions both, the deciding question is not which is better. It is which of those two limitations you can live with for two years.

What 88 litres changes

420 by 420 by 500 mm is not a marketing number. It is the difference between printing a helmet in one piece and printing it in four pieces and glueing. It is a full-size cosplay forearm, a 40 cm planter, a single-piece drone frame, a print-in-place hinge that does not need to be redesigned around a 250 mm bed. The Max V2 also gets a full-metal hotend, which is the part that lets you run abrasive filament without replacing the nozzle every spool.

The cost of that volume is time and heat. A 300 mm tall print on a bed that size takes a day, and an open-frame machine has no chamber, so ABS and ASA will warp on the corners unless you build an enclosure or stick to PLA and PETG. That is the trade nobody puts in the comparison table: big volume with an open frame means the big prints you want are the ones most likely to fail.

What four colours changes

Kobra X prints four colours natively and up to nineteen with extra units. TechRadar's Alastair Jennings tested it and called it a major update to the range — faster, better designed, with a proper touchscreen, and good enough to stand against the Bambu Lab A1 and the Creality Hi at the same price. He also flagged the two limitations that matter: the open frame limits engineering materials, and you need to keep the RFID sticker close if you want to run non-Anycubic filament.

That RFID detail is the small print of budget multi-colour. The colour system reads a tag on the spool to know what it is loaded with. Third-party filament without that tag means either transferring the sticker or telling the machine manually. It works, it is just friction, and friction is what makes people stop using a feature.

The part that decides it

Creative Bloq's reviewer spent four months with the Kobra 3 V2 and wrote the most useful sentence in this whole category: it prints flawlessly in single colour, but the ACE Pro multi-colour unit is problematic at best, clogging, jamming and tangling filament. The same reviewer had already been through two faulty Kobra S1 Combo units. Read that alongside the 4.2-star averages and you get a coherent picture: the printer is good, the colour changer is the weak link.

That reframes the £120. The Kobra X's four colours live inside a £280 machine, which means the colour hardware is being sold at a price where the colour hardware is the cheapest part of the build. The Max V2 at £400 puts the money into the frame and the volume instead. If you want the £430 Kobra X Combo with seven colours, you are paying £150 more than the base machine for a changer from the same family that the four-month reviewer gave up on.

What the Combo premium actually is

Two numbers worth knowing before you pick a row. The Kobra X is £280 and the Kobra X Combo is £430 — £150 for three more colours. The Kobra 3 Max V2 is £400 and its Combo version is £600 — £200 for eight colours on the big frame.

£150 for colour on a small machine is a fair price. £200 on top of a £400 printer is half the machine again, and it buys the feature that Creative Bloq's four-month test found least reliable. If you want a big printer, buy the big printer and add colour later. If you want colour, buy the small one — £430 for seven colours is a much easier number to defend than £600 for eight.

My call

Buy the Kobra 3 Max V2 at £400 if you already know what you want to print and it is bigger than a shoebox. Props, functional parts, jigs, anything structural. Single colour is not a limitation for those jobs — it is the normal way to print them, and 88 litres at £400 is the best volume-per-pound on the UK shelf.

Buy the Kobra X at £280 if you are learning. Four colours is the feature that keeps a first printer interesting in month two, when the calibration cube phase is over and you want to print something a friend will comment on. TechRadar's verdict that it is feature-packed and beginner-appropriate at this price is the fairest summary available.

Do not buy either expecting to upgrade your way past the trade. The £120 gap is not a ladder — one machine gets bigger and the other gets colours, and neither becomes the other. And whatever you choose, budget for a filament dryer before you budget for a second colour unit. Wet PLA looks exactly like a broken printer, and no amount of colour fixes it.