PrintVerdict

ANYCUBIC Photon Mono M7 Pro vs Photon P1 Max: two resin 3D printers, £430 against £800

We have not tested these printers. No machine on this page has been assembled, calibrated or run by us. Our comparisons are built from published specifications, current retail prices and summaries of publicly available owner feedback — never from hands-on claims we cannot back up.

This one has a clear answer and an uncomfortable one. The ANYCUBIC Photon Mono M7 Pro, 14K, with a 223 × 126 × 230 mm build area, is listed at £430 with 4.1 stars from 98 ratings. The ANYCUBIC Photon P1 Max, advertised with an 18.3-litre full-scale build volume and auto-levelling, is £800 — and carries no rating and no review count on our tracker at all. Nearly double the money, zero buyer feedback.

What £430 buys in the M7 Pro

The M7 Pro is a 14K monochrome resin printer built around a 10.1-inch LCD with a 13312 × 5120 resolution and a 223 × 126 × 230 mm build volume. Its headline feature is speed: Anycubic pairs the panel with a COB light source and an ACF release film to reach a claimed 150 mm per hour, and it is that combination that reviewers keep coming back to.

Tom's Hardware reviewed it under the title "Super Fast Resin", which is the whole pitch in two words. VoxelMatters described it as straightforward resin 3D printing. TechRadar's verdict is the most quotable: in its deal coverage the outlet calls the Photon Mono M7 Pro its expert's favourite mid-range resin printer and credits it with outstanding print quality — a machine that a professional reviewer recommends and that had already dropped to $480 in the US at the time of writing.

What the £800 P1 Max is asking you to trust

Auto-levelling and an 18.3-litre working volume are the two features that justify the P1 Max's price. Auto-levelling matters more on resin printers than on FDM machines, because a build plate that is out of alignment ruins the first layers of every print and the correction is fiddly. A resin vat of that size opens up the print categories that small printers simply cannot reach: large single-piece models, full-scale props, batch plates of small parts.

What is missing is any independent testing. No Amazon rating, no review count, and no third-party review that I can find of the P1 Max specifically. PCMag reviewed the Photon Mono M7 Max — a different machine in the same family — and called it a beast of a resin printer, but that is a recommendation for a sibling model, not for this one. Anyone spending £800 on the P1 Max is buying on the spec sheet.

The M7 Pro's documented problems

The M7 Pro's advantage is that its faults are known. Printer-Hub maintains a list of fourteen issues specific to the base Photon Mono M7, and it is unusually specific: an uneven build plate, a single strain gauge behind the auto-levelling system, the trade-off that comes with ACF release film, two speed modes, the proprietary .pm7 file format, Wi-Fi implementation, and a separate FPGA firmware update path. It also publishes the printer's 300–314 error code table.

That is a lot of caveats, and they are exactly the kind of caveat you cannot get for the P1 Max. ACF film is the trade-off at the centre of the M7 Pro's speed claim: it flexes more readily to release the print, which is what enables the fast lift speeds, and it is a consumable you will replace. The single strain gauge is the weakest possible implementation of auto-levelling, and it is the reason the plate-alignment issue keeps appearing in owner discussions. A proprietary file format locks you into the manufacturer's slicer.

None of that makes the M7 Pro a bad printer. It makes it a known printer with a £430 price tag and 98 ratings to calibrate your expectations against.

The rest of the resin shelf

£430 to £800 is not the only choice in this shop. Anycubic's FDM line-up sits underneath the resin machines — the Kobra X at £310 with 4.2 stars from 1,295 ratings, the Kobra 3 Max V2 at £400, the Kobra S1 ACE 2 Pro Combo at £485 — and those machines have between thirteen and forty times the review base of the M7 Pro. If what you actually want is multicolour printing rather than resin detail, you can buy three of them for the price of one P1 Max.

Resin printing also carries costs that do not appear in any of these prices: washing and curing hardware, gloves, ventilation, and the fact that the resin itself is a consumable with a shelf life. Neither listing includes those, and they are the reason a £430 machine often ends up costing more in year one than the £800 one appears to.

Which one I would buy

Buy the M7 Pro. It is listed at £430, it has been reviewed by Tom's Hardware, TechRadar and VoxelMatters, and PCMag has reviewed its sibling, the Photon Mono M7 Max, its known faults are documented in detail, and TechRadar's reviewer has called it their favourite in this price class. That is a machine you can buy with your eyes open.

Buy the P1 Max only if you need the build volume and the auto-levelling, and accept that you are an early buyer — the listing is here at £800. Nothing about the price is unreasonable for an 18.3-litre machine with auto-levelling in late 2026, but £800 and no review data is a combination that deserves a return window you intend to use.

The pricing matters too: the M7 Pro has been discounted to $480 in the US in recent months. £430 for a printer that reviewers call outstanding is the better deal in this comparison, and the current UK price is worth checking before you buy anything else.

Frequently asked questions

Is the Photon P1 Max worth twice the price of the M7 Pro? Only if you need its build volume. The P1 Max has auto-levelling and an 18.3-litre working volume, both of which the M7 Pro lacks, but it has no buyer ratings or third-party testing publicly available, whereas the M7 Pro has 98 ratings and multiple independent reviews.

What are the known issues with the Photon Mono M7 Pro? Printer-Hub documents fourteen, including an uneven build plate, a single strain gauge behind the auto-levelling, the ACF film consumable and a proprietary .pm7 file format. Those are documented weaknesses rather than defects affecting every unit.

Do these printers include wash and cure stations? Their listings do not include them. Washing, curing, resin and ventilation all cost extra and should be budgeted separately.

Prices and ratings were read from the live Amazon UK listings on 12 October 2026. We have not assembled, calibrated or run either printer; every third-party finding above is attributed to the publication that produced it.