PrintVerdict US

Anycubic Kobra 3 Max Combo vs QIDI Box: is a large 3D printer worth it, or do you need the multicolour box?

We have not tested these printers. No machine on this page has been assembled, calibrated or run by us. Our comparisons are built from published specifications, current retail prices and summaries of publicly available owner feedback — never from hands-on claims we cannot back up.

$553 against $1,598. The Bundle Anycubic Kobra 3 Max Combo in our US catalogue lands at $553 with the ACE Pro unit included. A QIDI Max4 Combo is $1,299, and the QIDI Box that turns it into a four-colour machine is another $299.

That is nearly three times the money for a similar headline capability — 420 mm of build height on one side, 390 mm on the other, four colours on both. The interesting question is not which prints better. It is which one you can actually live with.

What the Kobra 3 Max Combo gives you at $553

The build volume is the reason this machine exists: 420 × 420 × 500 mm, or roughly 16.5 inches on the footprint and 19.7 inches tall. Top speed is rated at 600 mm/s, though Anycubic itself recommends around 300 mm/s for everyday work — Creative Bloq reported the same figure when the price dropped from $1,149 to $574 in a clearance sale.

Beyond volume, the feature list is aggressive for the price. LeviQ 3.0 auto-levelling, a quick-release nozzle that swaps without cables using a single lever, RFID filament recognition so the ACE Pro unit knows what is loaded, and AI spaghetti detection to catch a failed print early. Sound levels are quoted around 60 dB in standard mode, which is loud enough to notice but not enough to matter in a garage.

Crucially, multicolour is not an add-on you buy later at this price — the ACE Pro is in the bundle. Four colours out of the box; add a second ACE Pro and you get eight.

Where the Kobra 3 Max Combo actually annoys people

3DPrintedDecor has published a full review of this machine with a pros-and-cons list that is more useful than most. Four items stand out.

Tall, thin-walled prints shake. Their example is a 19.5-inch vase printed in a single layer height that required slower speeds or internal supports to stay stable. This is a bedslinger with a big moving bed, and the taller the part, the more the motion system fights you. Worth knowing before you plan a 500 mm-tall print.

The AI features need a camera that is not included. Spaghetti detection is a selling point, but you buy the camera separately, and the default camera mount on the X-axis gives a poor view of the bed — their reviewer moved it out and up to get usable monitoring.

Nozzle options are limited. Only 0.4 mm nozzles are officially available, which caps how much you can trade detail for speed on large parts.

The ACE Pro connection needed a firmware update to work cleanly in their testing. Not unusual for this class of machine, but factor in an evening of setup.

Tom's Hardware reviewed the same machine and titled their verdict “Color to the Max”, framing it as a bigger, better bedslinger — which is a fair description of exactly what it is.

What the QIDI Box is, and why it costs more

QIDI's filament changer is a different piece of engineering. Four slots, hardened steel dual drive gears, four independent 42-stepper motors, and a sealed ABS/PC housing measuring 357 × 300 × 234 mm at 4.35 kg. Chain four of them together and you get 16 materials or colours.

The feature that justifies the price for technical printing is drying: the QIDI Box holds up to 65°C while printing, with real-time temperature and humidity readout on screen and in QIDI Studio. Damp filament is the root cause of most “why is my print popping and stringing” complaints, and being able to dry and print simultaneously removes an entire separate appliance from your bench.

Then there is the compatibility list, and this is where you should read carefully. The QIDI Box supports PLA, PETG, ABS, ASA, PET, PA, PC, PP, POM, HIPS, dried PVA and BVOH, TPU 64D, and carbon- or glass-fibre blends. It explicitly does not support TPE, generic TPU, TPU 95A, QIDI PAHT-CF, some silk PLAs, glow-in-the-dark PLA, or any material that is overly rigid or overly flexible. It also will not take cardboard spools without an adapter ring. If your filament drawer is full of cheap generic TPU, this system is not for you.

The printer you actually need behind the QIDI Box

A filament changer is useless without a machine to feed. The QIDI Max4 is the natural partner: 390 × 390 × 340 mm of build volume, 800 mm/s and 30,000 mm/s² acceleration, 370°C hotend, 120°C bed, and — the important one — active chamber heating to 65°C. That last figure is what separates it from the cheaper QIDI Q2C, which is enclosed but unheated. If you want to print ABS, ASA or PC without warping, chamber heat is not optional.

QIDI prices the pairing transparently: the Max4 is $1,049 on its own, $1,199 as a combo with a QIDI Box, and the standalone QIDI Box lists at $299. The Max4's 51.7-litre build volume is also the largest in QIDI's range, which is the real reason to pay Max4 money rather than Q2C money — you are buying space and heat, not just speed.

So which one?

Home decor, vases, cosplay parts, big functional pieces, four colours, and a budget that stops at $600: the Kobra 3 Max Combo. At $553 for a 420 × 420 × 500 mm multicolour machine, there is nothing else in the category that gets close on value, and the documented weaknesses — shaking on tall thin walls, no camera included, 0.4 mm only — are all manageable.

Engineering materials, nylon and carbon-fibre blends, moisture-sensitive filament, 16-colour capability, and a willingness to spend $1,600: the Max4 plus a QIDI Box. The 65°C chamber heating and the in-print drying are what you are paying the extra thousand dollars for, and they solve problems the Anycubic simply does not address.

The trap is buying the cheap machine for technical filament and then fighting warping for a year, or buying the expensive machine to print PLA vases. Match the machine to the material, and this comparison answers itself.