PrintVerdict US

Anycubic Kobra S1 3D Printer Review: $400 CoreXY, and why the $450 Combo is the better buy

We have not tested these printers. No machine on this page has been assembled, calibrated or run by us. Our comparisons are built from published specifications, current retail prices and summaries of publicly available owner feedback — never from hands-on claims we cannot back up.

$400 for the printer alone, $450 for the Combo, $290 for the ACE 2 Pro unit on its own. Do the arithmetic and the "printer only" listing stops making sense: buy the base machine and add multicolor later and you have spent $690 to reach a configuration the Combo ships in for $450. That $50 gap is the single most useful fact about buying this printer.

We have not printed on a Kobra S1. Everything below comes from the listings we track, from Tom's Hardware's and TechRadar's published reviews of the Kobra S1 platform, and from the pricing of the machines it competes with.

What the hardware is

CoreXY, 250 × 250 × 250 mm³, and a fully enclosed chamber on the S1 Max if you want to pay for it. The CoreXY layout matters more than the marketing implies: the bed moves in Z only, so tall prints do not get flung around by a bed slinging back and forth, and the footprint stays compact for the volume it offers. It is the same kinematic arrangement every printer above $400 now uses, and it is the reason a $400 machine can produce the surface finish this one does.

Tom's Hardware's review headline is unusually specific: a great CoreXY machine whose slicer brings the reviewer to tears. That is the shape of modern 3D printer criticism in one line. The hardware is largely solved at this price point; the software wrapper is where the frustration lives.

TechRadar's coverage of the Combo is warmer — the precision and quality of the print finish described as exceptional, the machine called beginner-friendly, and a separate piece calling it hard to beat on precision at this price. Both can be true at once: good mechanics and a slicer that fights you are not contradictory, they are the standard 2026 experience of buying a sub-$500 printer.

The three listings, priced honestly

The printer-only is Kobra S1 at $400, 4.1 stars from 113 ratings. Its own title warns that multicolor printing needs an ACE unit.

The Combo is Kobra S1 Combo at $450, 3.2 stars from 91 ratings. Note that average. The cheaper-to-build Combo has the worse owner score, which is not the pattern you would expect if the ACE was a straightforward bonus.

The add-on is ACE 2 Pro for $290, 4.2 from 53 ratings. Buying it separately costs 64% of the printer. Buying it bundled costs $50.

That leaves a decision with one sensible answer for most people: if you think you might ever want multicolor, buy the Combo, and if you are sure you only want single-colour printing, buy the printer-only and never open the ACE product page again.

Why the Combo's 3.2 should give you pause

Ninety-one ratings and a 3.2 average is a warning, not a death sentence. It means a meaningful share of buyers are giving three stars or fewer, and on a combo product the usual suspects are the multi-material unit rather than the printer. Feeding four filaments into one hotend reliably requires precise retraction and a lot of tuning; a unit that jams mid-print or leaves wisps between colours turns a $50 upgrade into a $50 problem.

There is a fair reading of this data and a cynical one. The fair reading is that the Combo attracts buyers who expect multicolor to be turnkey, and it is not. The cynical reading is that the ACE is the weak link in the package and Anycubic priced it at $50 precisely because it sells the ecosystem. Either way, the practical advice is the same: budget an evening for calibration before you print anything you care about, and don't judge the machine on the first four-colour model.

Where $400 lands in the market

CNET's coverage of a Best Buy sale this year listed a Bambu Lab P1S Combo at $500 and a Creality SparkX i7 at $330. That is the neighbourhood. Bambu's ecosystem is the benchmark for "it just works", and its slicer is the reason people pay a premium. Anycubic's answer at $400–$450 is more build volume flexibility and a lower entry price, at the cost of the polish.

PCMag's 2026 list of the best 3D printers does not hand this category to any one brand, which is the honest state of the market: at $400 there is no single correct answer, only a set of trade-offs between ecosystem maturity, build volume and price.

If you are buying your first printer and you have $500, the Bambu P1S Combo at $500 on sale is the calmer purchase. If you have $400 and you enjoy tuning, the Kobra S1 is more printer for the money.

The setup realities

An enclosed CoreXY at this price weighs around 15 kg assembled, and the assembly is mostly unboxing rather than building — the gantry arrives square. Budget 45 minutes to an hour for the physical setup, then another hour for bed levelling and a first-layer test.

Noise is the underrated factor. CoreXY machines at this price are not quiet; expect a whine from the steppers that carries through a floor. If the printer is going in a bedroom or a shared study, plan for an enclosure or a different room, and note that "enclosed" on the S1 Max is doing real work that the base machine's open frame does not.

Filament handling is the other hidden cost. A 250 mm cube machine goes through a 1 kg spool quickly on multi-day prints, and if you buy the Combo you will want a dry box, because four spools sitting open in a humid room will print badly and you will blame the machine.

Who should buy it

Buy the printer-only at $400 if you print functional parts in one colour — brackets, jigs, replacement knobs, enclosures for electronics — and you want CoreXY accuracy without paying the Bambu tax. Buy the Combo at $450 if multicolor is on your list at all, and accept a weekend of tuning the ACE before it behaves.

Don't buy either if you want a machine that works out of the box with no calibration. That product exists at $500 and it is not this one.

Verdict

The Kobra S1 is a $400 CoreXY printer with genuinely good mechanical results and a slicer that reviewers have publicly complained about. That combination is a fair trade at this price, not a defect — but it is a trade you should make with your eyes open.

The pricing is the part Anycubic got wrong. A $400 printer and a $290 add-on that ships together for $450 makes the standalone listing look like a trap for people who don't read carefully. Buy the Combo, expect to tune it, and you get a four-colour CoreXY for less than the competition charges for one colour.