PrintVerdict US

ELEGOO Centauri 2 Combo vs Creality Ender 3 V3 SE: The Best 3D Printer for Beginners Under $300

We have not tested these printers. No machine on this page has been assembled, calibrated or run by us. Our comparisons are built from published specifications, current retail prices and summaries of publicly available owner feedback — never from hands-on claims we cannot back up.

$296 for the ELEGOO Centauri 2 Combo. $233 for the Creality Ender 3 V3 SE. Sixty-three dollars apart, and roughly five years of design philosophy apart. One is a 256 mm CoreXY with a four-colour changer. The other is an open-frame bed slinger with a 250 mm/s claim and a CR Touch probe.

If you are buying your first printer in late 2026, this is not a close call — but it is worth understanding why, because the Ender is still the better machine for a specific kind of person.

The Centauri 2 Combo, as reviewed

Tom's Hardware calls it "a stripped-down version of the Centauri Carbon 2" and "a very good four-color, Core XY printer". The strip-down list is the important part: no lighting, no camera, no enclosure. Chamber volume is 256 mm cubed, the toolhead reaches 350°C, the bed reaches 110°C, and the CANVAS four-colour system handles filament changes.

Their verdict is nuanced in a way that matters for a beginner. Print quality is "great", it is "easy to use", and the reviewer openly wonders whether ELEGOO is making money at this price. But the missing enclosure limits which filaments you can use well: PLA, PETG and TPU are fine, ASA and ABS are not, and the high-temperature materials the 350°C hotend theoretically supports — PET-GF, PCTG — end up in a pinch without a heated chamber. Their framing is sharp: a lot of beginners only print PLA and see a four-colour machine as a toy factory, then regret the missing enclosure when they want a functional part in ASA.

There is also a spool-holder complaint: the holders do not work well with many filament spools. Minor, annoying, fixable with a printed adapter.

ELEGOO Centauri 2 Combo at $296 on Amazon — the four-colour version. The single-colour Centauri 2 is $251 if the changer is not the point for you.

The Ender 3 V3 SE, honestly

250 mm/s, CR Touch automatic levelling, dual Z-axis, auto filament loading, a 220 × 220 × 250 mm build volume and an open frame. It is a bed slinger: the plate moves in Y while the toolhead moves in X and Z. That design is a decade old, it is loud, and it is slower in practice than any CoreXY at the same claimed speed because the part itself is being thrown around.

What it has, and this is not a consolation prize, is the largest modification and spare-parts ecosystem in hobby printing. Every problem the Ender 3 family has ever had is documented, filmed and answered on a forum. A broken part costs $12 and arrives in two days. You can rebuild the hotend with a screwdriver.

It also has no enclosure, no camera and no filament changer — so on paper it loses every comparison to the Centauri. Where it wins is the thing beginners underestimate: when something goes wrong at 11pm, a machine with a million owners gets fixed, and a machine with a clever proprietary hotend gets a support ticket.

That last point is not hypothetical. A beginner in r/3dprinter, choosing between ELEGOO and Creality, worked out that clearing a bad clog on the Centauri Carbon means "either clear the clog from the radiator or replace the whole hotend assembly", while Creality's K2 design lets the nozzle be swapped at the extruder. That is a hobbyist's research, not a lab test, but it points at a real difference in serviceability.

Creality Ender 3 V3 SE at $233 on Amazon — the $236 listing is the same machine with slightly different bundled wording.

What $63 actually buys

Speed, in a way you will notice on every print. CoreXY moves a light toolhead instead of the whole model, so 256 mm cubed of CoreXY at modern accelerations finishes a job in a fraction of the time a bed slinger needs. Over a year of weekend printing, that is dozens of hours.

Four colours, which changes what you make rather than how fast. Signs, keychains, terrain, anything with a logo on the face. On the Ender, multi-colour means stopping mid-print to swap filament by hand or buying a $100+ add-on.

Automatic everything. The Centauri ships with full auto calibration; the Ender needs a CR Touch probe to level and still expects you to set your Z offset by eye on the first print. Both are easy by 2026 standards, one is easier.

And a print quality gap that Tom's Hardware's review makes explicit. The Centauri 2 is not a compromise machine that happens to be cheap — it is a good CoreXY that happens to be cheap.

Where the Ender still makes sense

Three cases. You want to learn how a printer works from the frame up, and you consider the tinkering part of the hobby rather than an obstacle. You need to print parts *for* the printer and expect to modify it continuously. Or you have a hard $250 ceiling and the $63 difference is a spool of filament and a spare nozzle, which for a first printer is genuinely more valuable than four colours.

Everyone else should buy the Centauri 2 Combo. At $296 with a four-colour changer and 256 mm of CoreXY, it is the better first printer by a margin that the Ender's community support cannot close — and Tom's Hardware's 2026 best-of list reflects that, with an ELEGOO Centauri model as its fastest budget pick and no Ender 3 variant anywhere on the page.

One caveat before either purchase: neither has an enclosure, so both are PLA and PETG machines. If your actual goal is functional parts in ABS or ASA, save for something enclosed — an ELEGOO Centauri Carbon 2 Combo at $379 or an Anycubic Kobra S1 — rather than buying either of these and discovering the limit in month three.