PrintVerdict US

Anycubic Kobra S1 Max Combo at $900: 350 mm of build volume, 16 colours, and the purge bill nobody quotes

We have not tested these printers. No machine on this page has been assembled, calibrated or run by us. Our comparisons are built from published specifications, current retail prices and summaries of publicly available owner feedback — never from hands-on claims we cannot back up.

Three hundred and fifty millimetres in every direction is the number that sells this machine. That is 42.9 litres of build volume, enough for a full helmet, a furniture insert or a robot frame printed in one piece instead of four that get glued and sanded. The Combo version — printer plus one ACE 2 Pro filament changer — is $900 right now, and there are five separate listings for this printer family on Amazon US, which is where the confusion starts.

The listing maths, before anything else

Kobra S1 Max Combo at $900 with 4.1 stars from 14 ratings. Another Combo listing at $1,000 with 4.0 from 33 ratings. A third at $900 with 4.6 from 11. Then the printer on its own: $700 for the S1 Max, $800 for a variant described as "printer only, fully enclosed CoreXY". And the ACE 2 Pro sold separately at $290.

Do that sum. Printer at $700 plus ACE at $290 is $990. The Combo at $900 is $90 cheaper than buying the parts, which is the only reason the Combo exists and the only argument you need against the $1,000 listing. If you are considering the $1,000 option because it has more ratings, you are paying $100 for social proof on a machine that is identical.

Eight to 33 ratings on a $900 printer is not a sample. It is a handful of early buyers. Do not read 4.6-versus-4.1 as a quality signal; read it as noise.

What the hardware is

Enclosed CoreXY, 350 × 350 × 350 mm, 350 °C hotend, 600 mm/s marketed top speed, heated chamber-adjacent airflow, and the ACE 2 Pro on top. That hotend temperature is the part that separates it from the 250 mm Kobra S1: 350 °C opens up ABS, ASA, polycarbonate, nylon and carbon-fibre blends, and the enclosure means those materials have a chance of not warping. On a 250 mm machine with a 320 °C hotend you can print engineering materials; on this one you can print them at a size where they are useful.

The ACE 2 Pro holds four spools, dries filament at up to 65 °C while printing, monitors humidity, reads RFID tags on Anycubic spools and refills automatically on runout. Sixteen colours needs four units. Almost nobody does that, and the people who do are running a small print farm.

The purge problem, stated plainly

Multi-colour FDM wastes filament by design. To change colour, the nozzle must be purged, and the purged material is scrap. Makers101's review of this specific machine puts it well: "multi-color support sounds impressive until you realize material purging can waste more filament than the model itself". That is not a knock on Anycubic — it is true of every filament-changing system on the market, including the Bambu AMS everyone compares it to.

What makes it harder to manage here is the software. Tom's Hardware reviewed the 250 mm Kobra S1 on the same platform and complained that the slicer will not tell you how much material a multi-colour print will waste, and that purge can only be adjusted mid-print from the printer's touchscreen. Nine months of owners later, the same complaint shows up in maker forums. So plan for it: layer-based colour changes are cheap, per-layer four-colour detail is expensive, and there is no reliable way to price a job before you slice it.

Who this is actually for

Makers who routinely print large functional parts — cosplay armour, jigs, enclosures, drone frames. Workshops and labs that need one machine to cover size and material variety. People who want CoreXY speed without paying Bambu Lab X1 prices.

Not for beginners. Not for anyone whose models all fit on a 200 mm bed, because you would be paying $400 for volume you never use. Not for anyone who needs a printer that works out of the box without tuning — Creative Bloq's reviewer went through two faulty Kobra S1 Combos before switching ecosystems, and while that is one person's experience, it is the kind of anecdote that should make you keep the return window open.

And not, honestly, for someone whose main interest is multi-colour. If colour is the point and size is not, the 250 mm S1 ACE 2 Pro Combo at £485 in the UK — roughly $550 in the US on deal — does the same colour work in a smaller box for less money.

The comparison that matters

At $900 the S1 Max Combo sits under the Creality K2 Plus Combo and well under anything in Bambu's X1 line, with a bigger build volume than either. What you give up is the ecosystem: Bambu's slicer and profile library are the reason people pay the premium, and Anycubic's software is the weakest part of this package by every account I can find. If you enjoy tuning, that is fine. If you want to press print and walk away, it is not.

Verdict

A lot of machine for $900, with a 350 °C hotend and an enclosure that make large engineering parts genuinely possible. The colour system is a bonus, not the reason to buy, and the slicer is the reason to hesitate.

Buy the $900 Combo, not the $1,000 one, and not the parts separately. Kobra S1 Max Combo, $900. If you already own the printer and just want the changer, the ACE 2 Pro is $290 — and if you are weighing the smaller machine instead, the Kobra S1 Max printer-only at $700 is the same 350 mm box without the filament system.