Two $900 Photon P1 Max listings: which anycubic resin 3d printer you actually get
There are two Photon P1 Max listings on Amazon US, both at $900, and they do not describe the same bundle. One is titled "Large Resin 3D Printer with Smart Tank Heating" and carries 59 ratings at 4.3. The other is titled "18.3L Resin 3D Printer with Auto-Leveling" and carries 19 ratings at 4.1. Same price. Same model name. Different machines on the pallet, or at least different configurations of one.
For anyone hunting an anycubic resin 3d printer in the large-format bracket, that is worth ten minutes of attention before checkout.
What the P1 Max is
A big MSLA resin printer with a heated vat, aimed at people printing large single pieces rather than plates of small ones. The "18.3L" figure in the second listing is the build envelope in litres, not a resolution claim — roughly the volume of a box large enough for a 1:6 scale bust, a full helmet shell, or a single-piece prop.
Anycubic's own levelling documentation lists two platform configurations for the P1 Max. The single-platform version prints one job at a time. The dual-platform version carries two build plates through the same vat, which is how Anycubic gets to the productivity claims — you are not printing faster per layer, you are printing twice as much per layer. That distinction matters when you compare it against the M7 MAX, which is a different machine with a different vat geometry.
Smart tank heating is the other headline feature. Resin viscosity climbs as the workshop cools, and cold resin needs longer exposure per layer to cure to the same depth. A heated vat holds the resin at a working temperature, which is genuinely useful in an unheated garage in January and largely irrelevant in a warm spare room.
The numbers that decide it
| Listing | Price | Rating | Ratings | Headline |
|---|---|---|---|---|
| Photon P1 Max, tank heating | $900 | 4.3 | 59 | large format, heated vat |
| Photon P1 Max, 18.3 L | $900 | 4.1 | 19 | auto-levelling, 18.3 L |
| Photon Mono M7 MAX, 13.6" | $700 | 4.0 | 306 | 7K LCD, large format |
| Photon Mono M7 MAX, 13.6-inch | $750 | 4.4 | 103 | 7K mono LCD |
The M7 MAX row is the interesting one. It is $200 cheaper than either P1 Max and has 306 ratings at 4.0 — five times the review sample. If your interest is large prints in general rather than the specific features of the P1 Max, the M7 MAX is the safer $700, and the second M7 MAX listing at $750 with a 4.4 average from 103 ratings suggests the pricing on these machines moves around a lot.
What Anycubic's own documentation admits
The P1 Max is sold as levelling-free, and Anycubic's maintenance wiki is refreshingly honest about when that stops being true. Manual recalibration is required after replacing the build platform or the exposure screen, and after a failed print that leaves cured resin on the film rather than on the plate. The procedure involves tightening the levelling screws until the on-screen indicator reads within a 0–100 N window, in three descending speeds.
The same wiki flags the lead screw. A rust-preventative oil is applied at the factory; as the screw and ball bearings run, that oil migrates and pools at the bottom of the screw and in the guide groove. Left alone, it collects dust and resin mist and turns into a grinding paste. Anycubic's guidance is to clean and re-grease on a schedule — which nobody does until a print starts showing Z banding.
That is the real cost of a $900 resin printer. Not the resin. The maintenance calendar.
What reviewers found
TechRadar rates the P1 Max as its pick for large resin prints and has flagged the price as having dropped toward $850 at times — meaning $900 today is not the floor. Tom's Hardware's review of the smaller Photon P1 praised the dual-material capability of that machine, which is a different product with a shared name and is worth remembering when you read search results.
Across owner reviews of large resin printers in this class, three complaints recur: the smell (resin is not a hobby you run in a bedroom without extraction), film life (an ACF film is a consumable, and large vats wear it faster), and post-processing volume — a 18.3 L build volume means an 18.3 L wash-and-cure problem.
We have not tested this printer. Prices and rating counts are from the live Amazon US listings on this site, 16 November 2026. The levelling and lead-screw details come from Anycubic's published maintenance documentation; the price history comment is TechRadar's.
The line item that dwarfs both
An 18-litre vat takes roughly three litres to fill to a working level. At typical US prices for standard 405 nm resin, that is a three-figure sum sitting in the machine before you print anything, and every failed print pours some of it back through a filter. Buy the printer that fits your parts, not the biggest one you can afford — the resin bill scales with the vat, not with the model.
Which listing to buy
If you print in a cold workshop, take the tank-heating listing at $900. The heated vat is not a gimmick, and 59 ratings at 4.3 is the better-supported of the two P1 Max listings.
If you print in a warm room and want two plates running, take the 18.3 L auto-levelling listing and confirm with the seller that the dual-platform hardware is included. Nineteen ratings is not enough evidence to be confident about anything else.
And if you just want a large resin printer, look at the M7 MAX at $700 first. Two hundred dollars cheaper, five times the reviews, and the difference in output between a 7K 13.6-inch panel and the P1 Max is smaller than the difference in price.