PrintVerdict US

QIDI Max4 at $1,099 or Kobra S1 Max Combo at $850: 51 litres against 43 litres and four colours

We have not tested either printer. Nothing here was assembled, calibrated or printed by us. Prices and rating counts come from our own US feed; build volumes, chamber temperature and hotend ratings are QIDI's and Anycubic's published specifications. Third-party conclusions are quoted from PCMag's Max4 review and from Tom's Hardware's review of the QIDI Plus4, the smaller machine in the same family.

Both of these are sold as a large 3d printer. Neither is wrong. The Max4 gives you 390×390×340 mm — about 51.7 litres — and a 65°C heated chamber. The Kobra S1 Max Combo gives you 350×350×350 mm — 42.9 litres — and four-colour printing. The price difference is $249, and it buys two completely different machines.

From our US feed: the QIDI Max4 is $1,099 with 4.8 stars from 13 ratings, and the Anycubic Kobra S1 Max Combo is $850 with 4.1 from 36. There are two more S1 Max Combo listings at $900, one at 4.0 from 18 and one at 4.6 from 11. Same machine, three rating pools, prices drifting by $50.

What the 65°C chamber is for

A heated chamber is not a comfort feature. ABS, ASA and polycarbonate shrink as they cool, and the shrink is uneven: the bottom of a tall print cools slower than the top, the differential pulls the corners up, and the part delaminates or lifts off the plate. A chamber at 65°C reduces that differential. On a 300 mm tall ABS print in an open machine, the corners will lift. In a 65°C chamber, they usually will not.

Tom's Hardware's review of the QIDI Plus4 — the 305×305×280 sibling — makes the same argument in almost the same words: a toasty heated chamber, excellent quality in ABS, ASA and Nylon, and a machine better suited to practical printing than to home hobbyists. It also notes the Plus4 lacks colour options. That is the honest positioning of this whole family.

If you print functional parts in engineering filament, the Max4's chamber is the reason to buy it and the $249 is not the deciding number. If you print PLA and PETG decorations, the chamber does nothing at all for you, and you are paying for a box that stays at room temperature.

What an 8-litre difference actually is

51.7 litres against 42.9 litres is 20% more volume. In practice: a 350 mm cube fits in the Anycubic. A 390 mm wide part does not. That matters for exactly one class of print — the one where you are 30 mm short and the model cannot be split without a visible seam. For everything else, both machines are big enough, and the 42.9-litre machine does it in four colours.

PCMag's review of the Max4 is titled around "bumps on the road to a big build area", which is the right framing. Large-format machines at this price are not big versions of small machines; they are their own engineering problem. A 390 mm bed that is not flat is worse than a 250 mm bed that is, and bed flatness is the first thing to check on any large printer, whatever the badge.

The colour problem, priced honestly

QIDI sells the Box multi-colour system for the Max4 at $299, which brings the total to $1,398 — $99 more than the Max4 Combo at $1,299. The ratings on the Box are the interesting part: 3.8 from 3 for the Max4 version, 3.4 from 18 for the Plus4 version, 3.2 from 21 for the Q2/Q2C version. Three ratings is not a sample. Eighteen and twenty-one is a hint, and the hint is that a $299 add-on with a 3.2 average is not the thing to build a workflow on.

By contrast, the S1 Max Combo ships with four colours in the box at $850. Anycubic's colour changer has its own documented reliability complaints — Creative Bloq's four-month test of a related machine found the ACE unit clogging and tangling — but it is included, not a $299 extra, and 36 ratings at 4.1 is a real sample.

The $200 question QIDI answers badly

Max4 alone is $1,099. Max4 Combo — the same printer with the Box included — is $1,299. So the Box costs $200 inside the bundle and $299 bought separately. That is a $99 penalty for deciding later, which is a strange way to price an accessory and a good reason to decide at checkout rather than in month three.

But the Combo also has 45 ratings against 13, and a 4.5 average against 4.8. More buyers, slightly lower satisfaction — usually the signature of a bundle where the add-on is the source of complaints. If you buy the Combo, budget an evening for the colour unit. If you buy the plain Max4, you are buying the part of the machine that 13 people rated 4.8.

Which one

Buy the Max4 if the parts you print are functional, tall, and made of ABS or ASA. The 65°C chamber plus 51.7 litres is a combination the $850 machine cannot match, and 4.8 stars from 13 ratings is small but not discouraging. Add a Box later only if you actually need colour, and expect to troubleshoot it.

Buy the Kobra S1 Max Combo if the parts you print are decorative, multi-coloured, and mostly PLA — or if you are buying one machine for a household that includes a teenager who wants to print a four-colour dragon. At $850 with four colours included and a 350 mm cube, it does the job the Max4 does for most people, for $249 less.

What I would not do is buy the Max4 for the rating. 4.8 from 13 is thirteen people, and large-format printers generate strong opinions in both directions in the first month. The spec sheet is the reliable part of this comparison; the stars are not.