PrintVerdict US

ELEGOO Centauri 2 Combo vs Anycubic Kobra 3 Max Combo: a $329 printer or a $553 large 3D printer bundle?

We have not tested these printers. No machine on this page has been assembled, calibrated or run by us. Our comparisons are built from published specifications, current retail prices and summaries of publicly available owner feedback — never from hands-on claims we cannot back up.

Two multicolour printers, $224 apart, and the ratings on the two listings could not be more different. The ELEGOO Centauri 2 Combo is $329 with 4.0 stars from 2,618 ratings. The Anycubic Kobra 3 Max Combo bundle is $553 with 5.0 stars from 3 ratings. One of those numbers is a track record. The other is a rounding error.

What the two listings say

The Centauri 2 family has three rungs on our tracker: the Centauri 2 on its own at $279, the Centauri 2 Combo at $329, and the Centauri Carbon 2 Combo at $399 — all three sharing the same 4.0 rating from the same 2,618 ratings, which tells you the ratings are pooled across the series rather than split per SKU. That pooling is normal on Amazon but it does mean the 4.0 average is a series score, not a verdict on the $329 model by itself.

The Kobra 3 Max bundle maths

This is the part worth reading twice. Anycubic lists the Kobra 3 Max printer on its own at $430, described as needing the ACE Pro for multicolour work. The ACE Pro filament box is listed separately at $250. Buy both and you are at $680.

The bundle at $553 includes both. So the bundle is $127 cheaper than assembling the same two items from their individual listings — which is a genuinely good deal, and the reason a bundle can justify its price in a way a bare printer cannot. If you want a large-format multicolour FDM printer from Anycubic, the bundle is the cheaper route to it, and that is true regardless of which printer you think is better.

The catch is the review base. Three ratings is not evidence. It is not even a sample. The bundle listing's five stars tell you that three people were happy, and nothing about how the machine behaves in month six.

What independent testing says about the Centauri

Tom's Hardware reviewed the Centauri 2 Combo under a headline about a budget-friendly printer being made more budget-friendly, and its positive framing of the price-to-capability ratio is the consensus in the coverage that exists. PCMag reviewed the Centauri Carbon 2 Combo and called it four colours at one compelling price, which is a review of a different SKU in the same family but points in the same direction. TechRadar's best 3D printers roundup states that the outlet has reviewed more than 50 machines, and the Centauri line features in the budget end of that landscape.

Owner discussion is where the useful caveats live. In r/3dprinter, a buyer weighing the Centauri Carbon 2 against the Creality K2 Combo described their requirements as reliability, ease of use and low maintenance — "I would like it to not need attention often, but when it does it's not a huge nightmare". That is the honest specification for a first printer, and it is the question neither Amazon rating answers. A 4.0 average across 2,618 ratings is consistent with a machine that mostly works and occasionally does not, which is exactly what you would expect at $329.

Where both of these fall short

Multicolour at this price is done with a filament-switching system, and switching systems are where the time goes. Every colour change purges filament, which means waste, longer prints and more chances for a jam. A four-colour model that takes twelve hours in one colour takes substantially longer in four, and the purge waste is a real consumable cost that no listing quantifies.

Then there is size. The Kobra 3 Max's appeal is a large build volume — the bundle title promises large printing volume and 600 mm/s — and large volume at high speed is the hardest combination to get right. A 600 mm/s figure on a big printer is a peak number for a well-tuned profile, not an average. The Centauri 2's limitation is the opposite: a smaller build volume means you are paying $329 and still can't print the large single-piece parts that the Kobra 3 Max exists to produce.

Neither machine includes the filament, and neither includes a dry box. On a large-format printer, moisture in PLA or PETG is the single most common cause of the surface defects that make people blame the hardware.

Which one I would buy

For a first printer, the Centauri 2 Combo at $329 is the more sensible purchase — the ELEGOO listing is here. You get 2,618 ratings to read through before you spend, independent reviews from Tom's Hardware and PCMag, and a lower entry cost while you find out whether you actually enjoy FDM printing. Most people who buy a first printer do not know yet whether they will still be using it in a year.

If you already know you need the build volume, buy the bundle and not the parts — the Kobra 3 Max Combo bundle at $553 undercuts the printer-plus-ACE-Pro combination by $127. That arithmetic holds even with only three ratings on the listing, because the two items inside it are the same items sold separately at higher prices.

One last thing about timing: the Centauri 2 has been discounted repeatedly through 2026, and a $329 price is the kind of number that moves around Prime events by $30 or more. Check the live price before you commit, and check it again a week later before you buy filament.

Frequently asked questions

Is the Kobra 3 Max Combo bundle good value? Yes on arithmetic: the printer alone is listed at $430 and the ACE Pro box at $250, so $553 for both saves $127. The caveat is the three ratings on the bundle listing.

Why do the Centauri 2, Centauri 2 Combo and Centauri Carbon 2 Combo all show 4.0 stars from 2,618 ratings? Amazon pools ratings across closely related SKUs in one family. Treat the figure as a series score rather than a verdict on one model.

Does multicolour printing waste filament? Yes. Every colour change purges material, so a four-colour print takes longer and consumes more filament than the same model in one colour. That cost is not in any listing.

Prices, ratings and rating counts were read from the live Amazon US listings on 12 October 2026. We have not assembled, calibrated or run either printer; third-party findings above are attributed to the publications that produced them.